Section

4THE GAME




Table of Contents


4 THE GAME...................................................................................................................................... 2

4.1 GAME OVERVIEW .................................................................................................................. 2

4.2 THE GAME ................................................................................................................................ 2
4.2.1 Definitions............................................................................................................................ 2
4.2.2 Match Format....................................................................................................................... 3

4.3 RULES........................................................................................................................................ 4
4.3.1 Safety ................................................................................................................................... 4
4.3.2 Game Periods....................................................................................................................... 4
4.3.3 Scoring ................................................................................................................................. 5
4.3.4 Robot Operations ................................................................................................................. 5
4.3.5 Team Member Actions ........................................................................................................ 8
4.3.6 Referee Interactions ............................................................................................................. 9







© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 1 of 9


4 THE GAME
4.1 GAME OVERVIEW

AIM HIGH is a game played on a field as illustrated in the figure below. Two alliances, one red and one blue,
composed of three teams each, compete in each match. The object of the game is to attain a higher score than
your opponent alliance by scoring balls in the center or corner goals, and/or by having ROBOTs on your
platform or ramp at the end of the match. The point values for each of those actions are explained below.


Note: The illustrations in this section of the manual are for a general visual understanding of the
field and game only. Teams should refer to the drawings for exact dimensions and field construction.

4.2 THE GAME

4.2.1 Definitions

ALLIANCE: A set of three FIRST Robotics Competition teams that work together during a match to play
AIM HIGH against an opposing ALLIANCE. ALLIANCEs are identified during the match by alliance color,
either red or blue.
ALLIANCE PLATFORM: The raised platform at each end of the field directly beneath the center goal. The
ALLIANCE PLATFORM includes the horizontal platform, the ramp between the floor and the platform, and
the vertical side walls on each side of the platform and ramp.
ALLIANCE ZONE: The 26' x 8' area behind the Alliance Station Wall at either end of the field, where the
alliance team members stand during the match. The ALLIANCE ZONE includes the area behind the
STARTING LINE.
© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 2 of 9


BACKBOT: The robot that an ALLIANCE keeps on their offensive side of the field while their ALLIANCE
is on defense. The BACKBOT can be any of the three ALLIANCE ROBOTs, and can change during the
match.
COACH: A student or adult mentor designated as the team advisor during the match and identified as the
person wearing a "COACH" pin or button.
DRIVER: A pre-college student team member responsible for operating and controlling the ROBOT.
HUMAN PLAYER: A pre-college student team member designated as the only team member permitted to
enter balls onto the field.
GAME PERIODS:
· AUTONOMOUS PERIOD: The 10 second period at the beginning of the match in which
the ROBOTS operate and react only to sensor inputs and to commands programmed by the
team into the onboard robot control system.
· SECOND PERIOD: The first 40-second period after AUTONOMOUS PERIOD, following
AUTONOMOUS PERIOD after a time delay.
· THIRD PERIOD: The second 40-second period after AUTONOMOUS PERIOD,
immediately following the SECOND PERIOD.
· FINAL PERIOD: The third 40-second period after AUTONOMOUS PERIOD, immediately
following the THIRD PERIOD.
ON-SIDES: The half of the field farthest from the ALLIANCE's driver's stations. This is the offensive half
of the field for the ALLIANCE on defense. The center line is part of the ON SIDES half of the field.
ROBOT: Anything that has passed ROBOT inspection that a team places on the field prior to the start of a
match.
ROBOT STARTING ZONE: Three 5 by 5 foot areas on each side of the field marked by Blue or Red 2"-wide
tape corresponding to the alliance colors.
STARTING LINE: A line 4 feet behind the Alliance Station Wall, indicated by a line of 2" white gaffer's
tape on the floor.

4.2.2 Match Format

A match is 2 minutes and 10 seconds long. An AUTONOMOUS PERIOD starts the match, which lasts 10
seconds. Following AUTONOMOUS PERIOD, there are 2 minutes of tele-operated game play, which are
broken up into three 40-second periods. There may be a short pause between AUTONOMOUS PERIOD and
the start of the tele-operated periods as the players stations are activated. The SECOND PERIOD and THIRD
PERIOD are offense/defense, where only one ALLIANCE can score. During the FINAL PERIOD, both
ALLIANCEs can score.









© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 3 of 9



4.3 RULES

4.3.1 Safety

<S01> If at any time a ROBOT's operation or design is deemed unsafe by the head referee, it will receive a 10-
point penalty and be disabled for the remainder of the match. If the safety violation is due to the ROBOT
design, the head referee has the option to not allow the ROBOT back onto the field unless the design has
been corrected. An example of unsafe operation is repeatedly throwing balls off the field at audience
members, media personnel, judges, referees, etc. An example of an unsafe design is a shooter mechanism
that has a large mass that is stopped abruptly at the end of travel and is at risk of breaking off the ROBOT
and becoming a projectile.

<S02> Muzzle Velocity - No ROBOT may throw a ball with an exit velocity of greater than 12 m/s (26.8 mph).
As a reference, a ball traveling at this velocity when leaving the ROBOT at an angle of 30º from
horizontal with no spin will travel approximately 35 feet. A robot that violates this rule will be
considered unsafe per <S01>.

<S03> Shooter Mechanism must remain inside the ROBOT - Any mechanism used to throw balls must be
contained within the original 28" x 38" x 60"starting envelope of the ROBOT and must be shielded such
that the mechanism cannot make contact with other ROBOTs. A ROBOT that violates this rule will be
considered unsafe per <S01>.

<S04> HP/DRIVER/COACH cannot touch a ROBOT - HUMAN PLAYERs, DRIVERs, and COACHes may
not directly contact the ROBOT at any time during the match. Violating this rule will result in the
disabling of the team's ROBOT for the remainder of the match.

<S05> E-Stop - Three Emergency Stop (E-Stop) buttons are located in each alliance station, one for each team.
Pressing an E-Stop button will cause the corresponding team's ROBOT to be disabled for the remainder
of the match. The E-Stop buttons are intended for remote shut down during a match in the event of safety
hazards and will not otherwise affect match score or duration. Any team member, including COACHes,
may press the E-Stop button.

4.3.2 Game Periods
<G01> AUTONOMOUS PERIOD - During AUTONOMOUS PERIOD both ALLIANCEs may play offense or
defense, and all goals are active for scoring. During AUTONOMOUS PERIOD the ROBOTs react only
to sensor inputs and commands programmed into the onboard control system. Human control of the
ROBOT is not permitted at this time. All ROBOT safety rules are still applicable during
AUTONOMOUS PERIOD.
<G02> SECOND PERIOD - The ALLIANCE with the highest score at the end of AUTONOMOUS PERIOD
will play on defense during the SECOND PERIOD. In the event of a tie at the end of AUTONOMOUS
PERIOD, the ALLIANCE playing on defense during SECOND PERIOD will be chosen at random. Any
balls scored in the defensive ALLIANCE's goals (opposite their DRIVER's station) during this period
will not be counted.
© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 4 of 9

<G03> THIRD PERIOD - The ALLIANCE that was on offense for the SECOND PERIOD will play on defense
during the THIRD PERIOD. Any balls scored in the defensive ALLIANCE's goals during this time will
not be counted.
<G04> FINAL PERIOD - Both ALLIANCEs may play offense or defense during the FINAL PERIOD. Balls
scored in all goals will be counted.

4.3.3 Scoring
<G05> In order for a ball to score, it must enter the goal and exit via the exit chute. A ball that bounces out of the
goal is not scored. Once a ball is scored for a particular ALLIANCE, it cannot score again until it is
entered onto the field by the opposing ALLIANCE's HUMAN PLAYER.

Point Values:
<G06> Center Goal - A ball scored in the center goal is worth 3 points for the ALLIANCE whose DRIVER's
station is opposite the goal, when that ALLIANCE is designated as playing offense.
<G07> Corner Goal - A ball scored in the either of the corner goals is worth 1 point for the ALLIANCE whose
DRIVER's station is opposite the goal, when that ALLIANCE is designated as playing offense.
<G08> AUTONOMOUS PERIOD Bonus - The ALLIANCE that has the highest point total at the end of
AUTONOMOUS PERIOD will receive a 10 point bonus.
<G09> ROBOTs on ALLIANCE PLATFORMs - ROBOTs score points if they are entirely on an ALLIANCE
PLATFORM at the end of the match. ALLIANCEs receive points for ROBOTs belonging to either
ALLIANCE that are on the ALLIANCE PLATFORM closest to the ALLIANCE's DRIVER station. If
any part of the ROBOT is touching the carpet, the ROBOT is not considered on the platform. If a
ROBOT is entirely on an ALLIANCE PLATFORM and is touching another ROBOT that is not entirely
on the ALLIANCE PLATFORM, it still is considered on the platform. One ROBOT on a platform or
ramp is worth 5 points, two ROBOTs are worth 10 points, 3 or more ROBOTs are worth 25 points.

4.3.4 Robot Operations

4.3.4.1 Starting Conditions

<G10> Starting Positions - At the beginning of a match, the three alliance ROBOTs must be placed inside one of
the three 5' x 5' robot starting zones located at mid-field to the right of the DRIVER's station and not
touching the tape boundaries. It is the responsibility of the head referee to verify that this rule is satisfied
prior to the start of the match. The match will not be started until all robots are in the starting position.

<G11> Alignment Devices - Alignment devices (templates, tape measures, lasers, etc.) that are not part of the
ROBOT may not be used to assist with positioning the ROBOT. Teams that use external alignment
devices to position their ROBOT will have their ROBOT arbitrarily repositioned by the head referee.

<G12> Starting Size - At the beginning of a match, each ROBOT must not exceed a volume of 28 inches by 38
inches by 60 inches tall, excluding its bumpers. It is the responsibility of the head referee to verify that
this rule is satisfied prior to the start of the match. An offending ROBOT will be removed before the start
of the match at the head referee's discretion.

© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 5 of 9

<G13> Balls Contained in ROBOTs at the Start of a match - Each ALLIANCE will start a match with 40 balls.
Each ROBOT may contain up to 10 balls at the start of a match. Any balls not contained within the robot
will be evenly distributed between the alliance ball corrals. All of the balls must be contained within the
ROBOT's 28" x 38" x 60" starting volume and must be clearly visible from outside the ROBOT. The
Head Referee will require that balls outside of the starting volume be removed. It is the responsibility of
the head referee to verify that this rule is satisfied prior to the start of the match.

4.3.4.2 Robot Out Of Bounds

<G14> ROBOT Out of Bounds - Any ROBOT that touches the floor (the surface co-planar with the playing
surface) outside of the field boundary will be disabled for the remainder of the match. No penalty points
will be assessed.

<G15> Grace Period After Autonomous - If a ROBOT should touch the floor outside of the field boundary during
the AUTONOMOUS PERIOD, it will have a 10 second "grace period" to right itself and return to the
playing field at the beginning of the tele-operated period. If it is able to do so within the 10-second grace
period, it will not be disabled. If at any time the referee should determine that the attempts to recover
from the situation constitute unsafe operations, Rule <S01> will take precedence.

4.3.4.3 Robot Dimensions

<G16> Maximum Height - A ROBOT may not extend above 60" above the floor or the ALLIANCE
PLATFORM in a stable configuration at any time during a match. Each violation shall result in a penalty
of 5 points per occurrence or 5 points per ball shot or ball blocked during the occurrence, whichever is
greater. ROBOTs designed to violate this rule are not allowed. For example, a ROBOT that extends a
blocking device in front of the center goal will be disqualified. Transient conditions that may cause a
diagonal dimension of the robot to momentarily exceed the 60" height restriction ­ such as during a tip-
over or when climbing onto the ALLIANCE PLATFORM ­ are not subject to this rule. The one
exception to the height restriction is provided in rule <R13> (flag rule).

<G17> ROBOT Orientation - ROBOTs must maintain their vertical orientation with respect to their starting
position throughout the match. ROBOTs may not intentionally tip over onto one of their initially vertical
sides and operate with this side parallel to the ground. If a ROBOT is accidentally or intentionally tipped
over onto its side, it cannot score any balls in any goals from this orientation.

<G18> ROBOT Extension Size ­ ROBOTs may not extend beyond a 60-inch limit in either horizontal cardinal
dimension as specified in <R08>. Robots that violate this rule will be disqualified.

4.3.4.4 Robot Interaction

<G19> Field Interaction - ROBOTs may push or react against any elements of the field, provided there is no
damage or disruption of the field elements. ROBOTs may not grab, grasp, grapple, or attach to any field
structure. If a ROBOT violates this rule, the head referee will give one warning. If the referee determines
that team is disregarding the warning, the team's ROBOT will be disabled for the remainder of the match.

<G20> Field Damage - The head referee may disable a ROBOT that has damaged the playing field, carpet, goals,
etc. if the head referee feels that further damage is likely to occur. The head referee may require
corrective action, such as eliminating a sharp edge, before the ROBOT will be allowed to compete in
subsequent matches.

© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 6 of 9

<G21> ROBOT Incursion into the Corner Goal - Incidental incursion into the corner goal that occurs as a result
of a ROBOT pushing balls into the goal is permitted, not to exceed a distance of approximately 3 inches.
Intentional incursion, for example to use a ball gathering mechanism to drop off balls inside the goal, or
extending a portion of the ROBOT through the goal opening to activate the ball counting system, will
result in disqualification of the offending ROBOT.

<G22> Intentional ROBOT - ROBOT Interaction - Strategies aimed solely at the destruction, damage, tipping
over, or entanglement of ROBOTs are not in the spirit of the FIRST Robotics Competition and are not
allowed. However, AIM HIGH is a highly interactive game, and some appropriate contact is allowed
subject to the following guidelines:
· Rule <R35> in Section 5.3.4 establishes ROBOT bumper zones. Any contact within this zone is
generally acceptable, with the exception of high speed long distance ramming. If two ROBOTs
choose not to use bumpers, and they contact such that simultaneous contact occurs both in and out of
the bumper zone, then this contact is considered within the bumper zone.
· Contact outside of the bumper zone is generally not acceptable, and the offending ROBOT will be
assessed a 5-point penalty, and may be disqualified from the match if the offense is particularly
egregious or if it results in substantial damage to another ROBOT. Incidental contact will not be
penalized. Contact outside the bumper zone that is a result of tipping caused by contact within the
bumper zone will be considered incidental contact.
· If a ROBOT extends outside of its 28 inch by 38 inch starting footprint, it is responsible for the
extension's contact with other ROBOTs and must not use the extension to contact other ROBOTs
outside of the bumper zone. Likewise, other ROBOTs will not be responsible for contact with the
extension outside of the bumper zone. Again, incidental contact will not be penalized.


<G23> Accidental Entanglement - If, due to its own loose cables, hoses, cordage, etc., a ROBOT unintentionally
but routinely entangles another ROBOT as a result of normal game interaction, the head referee may at
his or her discretion disqualify the offending ROBOT and require that the entangling device be repaired
prior to the ROBOT's next match.

<G24> Pinning - While on the carpeted field surface, a ROBOT cannot pin (inhibit the movement of another
ROBOT while in contact with a field element or border) for more than 10 seconds. This rule does not
apply if either ROBOT is entirely on an ALLIANCE PLATFORM. If a ROBOT has been pinned for 10
seconds, the team with the pinning ROBOT will be told by a referee to release the pinned ROBOT and
back away approximately 3 feet. Once the pinning ROBOT has backed off by 3 feet, it may again
attempt to pin its opponent, and if successful, the 10 second count will start over. If a referee determines
that this rule has been violated, a 5-point penalty flag will be assessed for each violation.

4.3.4.5 Match Play

<G25> Balls Out of Play - Balls that leave the playing field over the side field boundaries will be placed on the
field just inside the field boundary approximately where it left the field, provided it is safe to do so. Balls
that leave the field over the player station will be given to a HUMAN PLAYER closest to where the ball
left the field. Every attempt will be made to return balls to the field. However, if there are no balls
available to replace balls thrown out of the immediate area, then the match will continue with the balls
that remain on the field.

<G26> ROBOT Off Sides - During the SECOND and THIRD PERIODs, the ALLIANCE on defense must keep
at least one ROBOT (their BACKBOT) on the half of the field farthest from their DRIVER's station.
There will be a 5 second grace period at the start of the SECOND and THIRD PERIOD to allow an
ALLIANCE to get their BACKBOT "ON SIDES", however, the BACKBOT must be moving toward the
mid-field line at the start of the period. The mid-field line is included in the defensive half of the field.
© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 7 of 9

Multiple ALLIANCE robots are permitted in the farthest half of the field. ROBOTs of the same
ALLIANCE may dynamically change the designation of the BACKBOT during the defensive period as
long as there is at least one BACKBOT during the entire period. Violations of this rule will result in a 5-
point penalty against the offending ALLIANCE for the initial violation. An additional 5-point penalty
will be assessed for every 5 seconds beyond the grace period that a BACKBOT is not "ON SIDES". A
BACKBOT that is prevented by an offensive ROBOT from crossing the field centerline will not be
penalized.

<G27> ROBOTs Must Throw the Balls into the Center Goal - Only a ROBOT may throw a ball into the center
goal. The kinetic energy of the ball must be supplied by the ROBOT. A HUMAN PLAYER may not
bounce a ball off a ROBOT and score it in the center goal. A violation of this rule will result in a 5-point
penalty.

<G28> ROBOTs Can Pick Up Balls - ROBOTs are permitted to pick up balls from the field.

<G29> Detaching Mechanisms - ROBOTs may not intentionally detach parts or leave multiple mechanisms on
the field. Violations will result in a 5-point penalty. If an intentionally detached component or
mechanism impedes access to a ramp or a goal, the offending ROBOT will be disqualified from the
match.

<G30> Field Reset, ROBOT Ball Release - ROBOTs must be designed to permit the release and removal of any
balls from the ROBOT without being powered up after a match. If a ROBOT violates this rule, the head
referee will warn the offending team and request that they modify the ROBOT. If the modification is not
made, the head referee may not allow the ROBOT to compete in future matches.

4.3.5 Team Member Actions

<G31> Number of people in the ALLIANCE ZONE - Each team shall include a maximum of one HUMAN
PLAYER, two DRIVERs, and one COACH. A team with additional personnel in the ALLIANCE ZONE
will be assessed a 5-point penalty, and the additional person will be asked to immediately leave the
ALLIANCE ZONE.

<G32> Travel Within the ALLIANCE ZONE - All team members may travel anywhere within the ALLIANCE
ZONE.

<G33> HUMAN PLAYER Shooting Zone - The HUMAN PLAYER must remain behind the STARTING LINE
and within the ALLIANCE ZONE when they are entering a ball onto the field. Each violation will result
in a 5-point penalty.

<G34> HUMAN PLAYER/COACH/DRIVER Out of ZONE - All team members must stay within their
ALLIANCE ZONE during the match. Each violation will result in a 5-point penalty.

<G35> HP/COACH/DRIVER Over The STARTING LINE During AUTONOMOUS PERIOD - No team
member may pass the STARTING LINE in the ALLIANCE ZONE until the conclusion of the
AUTONOMOUS PERIOD (when the field timer displays zero seconds). Each violation will result in a 5-
point penalty. Exceptions will be made in cases involving personal safety or the safety of the ROBOT
controls.

© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 8 of 9

<G36> HUMAN PLAYER Entering Balls on the Field During AUTONOMOUS PERIOD - A HUMAN
PLAYER may not enter a ball onto the field during AUTONOMOUS PERIOD. A violation of this rule
will result in a 5-point penalty.

<G37> Team Member Ball Handling - Any HUMAN PLAYER, DRIVER, or COACH may handle balls that are
in the ALLIANCE ZONE during a match.

<G38> Entering balls onto the field - Only the HUMAN PLAYERs may enter a ball onto the field, either by
attempting to throw it to a ROBOT, attempting to throw it in a corner goal, or throwing it onto the field
for pickup by a ROBOT. Balls must be thrown over the top of the Alliance Station Wall, and may not be
thrown around the side of the Alliance Station Wall. Violations of this rule will result in a 5-point penalty
per ball entered onto the field.

<G39> Scoring interference - HUMAN PLAYERs, DRIVERs, or COACHes may not reach into a ball chute or in
any way interfere with the ball counting system. Violations of this rule will result in disqualification.

<G40> COACHes Operating ROBOTs - During a match, the ROBOTs may be remotely operated solely by the
DRIVERs and/or by software running in the on-board control system. Any violation of this rule, such as
a COACH touching the controls, will result in the ROBOT being disabled and disqualified from the
match.

<G41> Respect and Professional Demeanor - FIRST Competitions promote respect and professional demeanor.
In the event that team members who are on the playing field (DRIVERS, COACHES, or HUMAN
PLAYERS) are uncivil towards competition field personnel (including referees, tech advisors, FIRST
field volunteers, etc.) or other teams, the team may be disqualified from the match. This rule only
applies to team field personnel while on the playing field. Teams may not receive penalties for actions
off the field, however they will be held accountable.

4.3.6 Referee Interactions

<G42> Any discussions regarding rules, scores, or penalties must be between the DRIVERs or HUMAN
PLAYERs (pre-college team members) and the head referee.

<G43> The Head Referee may at his or her discretion receive input from other sources, particularly Game Design
Committee members that may be present at an event. However, the Head Referee's decision is final
(reference Rule <T01>).



© FIRST 2006
FIRST Robotics Competition Manual, Section 4 ­ The Game, Rev A
Page 9 of 9